Changes

Jump to navigation Jump to search
no edit summary
Line 9: Line 9:     
=== Print preparation ===
 
=== Print preparation ===
Once you have an .STL file, you now need to turn it into machine code that can be read by the 3D printer, a .gcode, using a slicer. We have Ultimaker 2+ printers, so you will need to use Ultimaker Cura. It’s free to install or you can use one of the computers in the Makerspace  
+
Once you have an .STL file, you now need to turn it into machine code that can be read by the 3D printer, a .gcode, using a slicer. We have Ultimaker 2+ printers, so you will need to use [https://ultimaker.com/software/ultimaker-cura/ Ultimaker Cura]. It’s free to install or you can use one of the computers in the Makerspace  
    
==== Setting up Cura ====
 
==== Setting up Cura ====
MakerRepo Staff, MakerRepo Volunteers
872

edits

Navigation menu