Changes

*'''Focusing laser:''' We '''do not''' use the automatic focus function on the laser (Please, '''<u>NEVER</u>''' check the box for Auto-Focus it will break the laser), therefore you need to manually focus the laser before your cut.

*'''Focusing laser:''' We '''do not''' use the automatic focus function on the laser (Please, '''<u>NEVER</u>''' check the box for Auto-Focus it will break the laser), therefore you need to manually focus the laser before your cut.

*#Make sure the laser is on.

*#Make sure the laser is on.

*#Place the material on the laser bed. You want to make sure that the are you are cutting is parallel to laser bed and the track on which the laser head moves. If there is a variation in height, you will see a variation in properties of the rastering and vectoring done by the laser

*#Place the material on the laser bed. You want to make sure that the area you are cutting is parallel to laser bed and the track on which the laser head moves. If there is a variation in height, you will see a variation in properties of the rastering and vectoring done by the laser

*#Place the manual focus guide onto the laser cutter head. The guide is attached with magnets.

*#Place the manual focus guide onto the laser cutter head. The guide is attached with magnets.

*#Press the Focus button on the laser cutter control panel. The laser head will move over slightly, make sure that the material is still under the manual focus.

*#Press the Focus button on the laser cutter control panel. The laser head will move over slightly, make sure that the material is still under the manual focus.