Changes

Jump to navigation Jump to search
Line 137: Line 137:  
#Hold the soldering iron like a pen. Heat the two wires for 1-2 seconds and then flow solder on the connection. The goal is to heat the connection not the solder. Once you see the solder flow evenly throughout the connection, remove the solder and soldering iron.
 
#Hold the soldering iron like a pen. Heat the two wires for 1-2 seconds and then flow solder on the connection. The goal is to heat the connection not the solder. Once you see the solder flow evenly throughout the connection, remove the solder and soldering iron.
 
#Allow the connection to cool, this usually takes 20-30 seconds. During this time, avoid moving the wires
 
#Allow the connection to cool, this usually takes 20-30 seconds. During this time, avoid moving the wires
 +
<youtube>YF0bqfVcmt4?list=PLA-oTz8kRbrohnM_tMzgk4IfheRG29Fq5</youtube>
 +
<youtube>VmE5KXr1juk?list=PLA-oTz8kRbrohnM_tMzgk4IfheRG29Fq5</youtube>
 +
<youtube>Z8lLFY7iBW8?list=PLA-oTz8kRbrohnM_tMzgk4IfheRG29Fq5</youtube>
    
==== Soldering THT ====
 
==== Soldering THT ====
MakerRepo Staff, MakerRepo Volunteers
240

edits

Navigation menu