Changes

Jump to navigation Jump to search
Line 8: Line 8:  
| minLayerHeight = 0.01
 
| minLayerHeight = 0.01
 
| heatedBuildPlate = Yes
 
| heatedBuildPlate = Yes
|float=right
+
| float = right
|buildWidth=305
+
| moreInformation = https://en.wiki.makerepo.com/wiki/Raise3D_N2_Plus
|buildDepth=305
+
| buildWidth = 305
|buildHeight=605
+
| buildDepth = 305
|recommendedSettings=https://en.wiki.makerepo.com/wiki/Raise3D_N2_Plus}}
+
| buildHeight = 605
 +
| recommendedSettings = https://en.wiki.makerepo.com/wiki/Raise3D_N2_Plus
 +
}}
    
==Recommended settings==
 
==Recommended settings==
Line 51: Line 53:  
|120
 
|120
 
|}
 
|}
 +
 +
== Staring the print ==
 +
To start a print on the Raise N2 Plus, your file must first be sliced in a slicer called ideaMaker. Once sliced the file must be saved on a USB stick and inserted into the side of the machine. Then a password must be entered before you can continue. Please ask a staff member for help. Finally select print and navigate the folders for your file and select print. the machine will then heat up and start printing.
 
[[Category:3D Printers]]
 
[[Category:3D Printers]]
MakerRepo Administrators, MakerRepo Staff
531

edits

Navigation menu