Digital technologies/Textiles/3D printing on Fabric

Introduction

3D printing is so versatile that it can also be incorporated into fabric, hence bringing rise to futuristic garment features.

It has flourished in the fashion industry, and many famous brands are already making and selling 3D-printed garments.

3D printing enables you to create your own designs for your clothes and personalize them as you would like. From cosplayers' costumes to footwear to pieces of jewelry to intricate patterns for your old shirts, 3D printing can bring your creations to life.

Figure 1. 3D printed fabric

This document will give you an overview of how to 3D print on fabrics.

It will show three examples, with different filaments used, but the technique remains fairly the same.

3D printing on fabric examples

The following figures depict the final products obtained:

Dragon Scales

Dragon scales are inevitable when you are dealing with cosplayers’ costumes.

Moreover, their whimsical look can be pleasant for fantasy fans.

As shown in the picture, you can create your own dragon scale fabrics by incorporating your fabric between your 3D printed parts.

Figure 2. Wood fill dragon scales

Glow in the dark Hexagons

The hexagons form a delightful pattern which may be ideal for making pieces of jewelry.

Figure 3. Glow-in-the-dark hexagons

Photochromatic Snap Buttons

Snap buttons can revolutionize the way you use buttons, which are usually sewn on your shirts.

Figure 4. Photochromatic snap buttons on woven fabric

Figure 5. Photochromatic snap buttons

Figure 6. Photochromatic snap buttons under UV light

Different types of filaments were used. You can use the material of your choice and make the necessary changes in your 3D slicer.

Filament used

The following table shows the printers used for each filament type and some of the difficulties that came up.

The printer, Flsun v400 was the first option for all three examples since it is faster and was ideal for filaments of 1.75 mm, yet one filament type did not perform well with this printer, namely the Woodfill PLA.

Printer	Filament	Slicer	Difficulties encountered
Colour fab Wood fill PLA (2.85 mm)	Ultimaker 2+-Nozzle 0.4 mm	Cura	Incessant clogging with Flsun v400 printer Got burnt several times v400 nozzle Over extrusion with a 0.8 mm nozzle-UMP Was not adhering to build plate-UMP
Glow in the dark PLA (1.75 mm)	Flsun v400	Cura	No significant difficulties were encountered, it worked like normal PLA
Photochromatic PLA (1.75 mm)	Flsun v400	Cura	No significant difficulties were encountered, it worked like normal PLA

Table 1. Filament used

Note: Some specialty filaments are abrasive and can severely damage the nozzle

Getting Started

Preparing your model

A 3D CAD software, such as Onshape can be used to build up your model from scratch.

Or you can find some readily available designs online on Thingiverse.

Note: The dragon scales and the hexagons were from Thingiverse.

-Dragon scales

-Hexagons

-Snap buttons

Slicer

Now you must bring your model to your slicer.

To use the slicer:

• Download the slicer you will need for free or use one of Makerspace's computers.
• Bring your model to your slicer. Remember to save your file as STL.

Print settings

The following table shows the changes made in the print settings; all other settings were left the same.

	Dragon scales	Hexagons	Snap buttons
Material	Wood fill PLA colorFabb Woodfill	Generic PLA	Generic PLA
Nozzle size	0.4 mm	0.4 mm	0.4 mm
Infill pattern	Grid	Grid	Grid
Infill density	10 %	10 %	10 %
Layer height	0.15 mm	0.20 mm	0.15 mm
Print speed	_	150 mm/s	150 mm/s
Build-plate adhesion	None	None	None
Printing temperature	_	210 °C	210 °C
Build-plate temperature	_	60 °C	60 °C

Table 2. Filament used

Additionally, to facilitate the printing process after incorporating the fabric,

Go to Custom --> All in the Print settings and enable the following:

• Enable Retraction-reduces stringing,
• Z Hop when retracted-prevents nozzle from dragging along surface,

Fig 7. All print settings