MakerRepo Staff, MakerRepo Volunteers
872
edits
Changes
Jump to navigation
Jump to search
Line 116:
Line 116: − + − + − + − + − + − + − + − + − + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Digital technologies/Textiles/3D printing on Fabric (view source)
Revision as of 18:34, 9 August 2024
, 9 August→Print settings
==== Print settings ====
==== Print settings ====
The following table shows the changes made in the print settings; all other settings were left the same.
The following table shows the changes made in the print settings; all other settings were left the same.
{| class="wikitable" style="margin:1em auto 1em auto;"
|+
! scope="col" |
! scope="col" |Dragon scales
! scope="col" |Hexagons
! scope="col" |Snap buttons
|-
|Material
|Wood fill PLA colorFabb Woodfill
|Generic PLA
|Generic PLA
|-
|Nozzle size
|0.4 mm
|0.4 mm
|0.4 mm
|-
|Infill pattern
|Grid
|Grid
|Grid
|-
|Infill density
|10 %
|10 %
|10 %
|-
|Layer height
|0.15 mm
|0.20 mm
|0.15 mm
|-
|Print speed
|
|150 mm/s
|150 mm/s
|-
|Build-plate adhesion
|None
|None
|None
|-
|Printing temperature
|
|210 °C
|210 °C
|-
|Build-plate temperature
|
|60 °C
|60 °C
|}
<div class="center" style="width: auto; margin-left: auto; margin-right: auto;">Table 1. Filament used</div>
== References ==
== References ==