Difference between revisions of "Flsun v400"
Jump to navigation
Jump to search
(Blanked the page) Tag: Blanking |
Tags: Visual edit Mobile web edit Mobile edit |
||
| (6 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| + | {{PrinterInfobox | ||
| + | | name = FLsun v400 | ||
| + | | image = Flsun v400.jpg | ||
| + | | slicerName = Cura | ||
| + | | slicerLink = https://ultimaker.com/cura | ||
| + | | buildVolume = ⌀300 × 410 mm | ||
| + | | materials = PLA, ABS, Flexible, etc | ||
| + | | minLayerHeight = 0.05 | ||
| + | | heatedBuildPlate = Yes | ||
| + | | float = right | ||
| + | | buildWidth = 300 | ||
| + | | buildDepth = 300 | ||
| + | | buildHeight = 410 | ||
| + | | moreInformation = https://en.wiki.makerepo.com/wiki/Flsun_v400 | ||
| + | }} | ||
| + | ==Recommended settings== | ||
| + | {| class="wikitable" | ||
| + | | | ||
| + | |Normal | ||
| + | |- | ||
| + | |Layer Height (mm) | ||
| + | |0.2 | ||
| + | |- | ||
| + | |Top/Bottom Layer thickness (mm) | ||
| + | |1.2 | ||
| + | |- | ||
| + | |Wall thickness (mm) | ||
| + | |1.2 | ||
| + | |- | ||
| + | |Infill (%) | ||
| + | |20 | ||
| + | |- | ||
| + | |Build Speed (mm/s) | ||
| + | |400 | ||
| + | |- | ||
| + | |Travel Speed (mm/s) | ||
| + | |500 | ||
| + | |} | ||
| + | The FLsun v400 is a large-volume, very quick delta 3D printer available for use at the Richard l'Abbé Makerspace. | ||
| + | == Starting the print == | ||
| + | To start printing on the Flsun V400, first slice your file in Cura. Then save it to a USB drive and insert it into the side of the printer display. Then select print on the main menu, and navigate the folders to find your file. Finally tap on your fila and press print. The printer will the warm up and start printing. | ||
| + | [[Category:3D Printers]] | ||
Latest revision as of 19:08, 4 June 2024
FLsun v400
| Slicer | Cura |
|---|---|
| Build Volume | 300 × 300 × 410 mm |
| Compatible materials | PLA, ABS, Flexible, etc |
| Minimum Layer Height | 0.05 mm |
| Heated Build Plate | Yes |
| More Information | FLsun v400 |
Recommended settings
| Normal | |
| Layer Height (mm) | 0.2 |
| Top/Bottom Layer thickness (mm) | 1.2 |
| Wall thickness (mm) | 1.2 |
| Infill (%) | 20 |
| Build Speed (mm/s) | 400 |
| Travel Speed (mm/s) | 500 |
The FLsun v400 is a large-volume, very quick delta 3D printer available for use at the Richard l'Abbé Makerspace.
Starting the print
To start printing on the Flsun V400, first slice your file in Cura. Then save it to a USB drive and insert it into the side of the printer display. Then select print on the main menu, and navigate the folders to find your file. Finally tap on your fila and press print. The printer will the warm up and start printing.