Template:PrinterInfobox

No description.

Template parameters

This template prefers block formatting of parameters.

Parameter		Description	Type	Status
Name	name	Full name of the printer Example Ultimaker 2+ Auto value	Line	required
Image	image	Name of the image displayed in the info box Example myimage.png	File	required
Slicer Name	slicerName	Full name of the main slicer used with this printer Example Cura	String	required
Slicer URL	slicerLink	URL to the download *page* of the slicer (not a direct link) Example https://ultimaker.com/cura	URL	required
Build Width	buildWidth	Build volume width, in mm Default 200 Example 200 Auto value	Number	required
Build Depth	buildDepth	Build volume depth, in mm Default 200 Example 200 Auto value	Unknown	required
Build Height	buildHeight	Build volume height, in mm Default 200 Example 200 Auto value	Unknown	required
Materials	materials	List of materials usable on this machine Example PLA, ABS	Content	required
Minimum Layer Height (mm)	minLayerHeight	Printer's minimum (smallest) layer height Default 0.2 Auto value	Number	required
Heated Build Plate	heatedBuildPlate	Does this printer have a heated build plate?	Boolean	required
Float	float	Valid values are 'none', 'left', or 'right'. Default right Example left Auto value right	String	optional
Recommended settings	recommendedSettings	URL to the printer settings page Example	URL	optional
Use Cases	useCases	Typical or potential use cases for this hardware. Example	String	optional