CEED Wiki - User contributions [en]

File:Properties1.png

2020-02-02T17:58:14Z

Gouled:

Properties

File:Job Manager.png

2020-02-02T17:43:07Z

Gouled:

Job Manager

File:Properties.png

2020-02-02T17:39:39Z

Gouled:

Properties

Main Page

2020-01-23T20:53:36Z

Gouled:

[[File:CEED-black.png|center|400x400px]]
<div style="text-align: center; font-size: 3em; margin-top: 1em;">Welcome to the CEED Wiki!</div>

==Getting Started==

===Makerspace Resources===

*[[3D Printing|3D Printing]]
*[[Embroidery]]
*[[Laser Cutting]]
*[[Soldering]]
*[[Virtual Reality]]
*[[Uploading Projects to MakerRepo]]
*[[Five Easy ways to Kill an Arduino]]
*

===Makerlab Resources===

*[[Design for manufacturing]]
*[[GNG tips and tricks]]
*[[How to submit a project to MakerRepo]]
*[[Purchasing Materials]]
*[[Certifying Students on MakerRepo|Certifying students in MakerRepo [STAFF]]]

Digital technologies/Arduino/Five Easy ways to Kill an Arduino

2020-01-23T20:52:20Z

Gouled: Created page with "=== '''1.Pulling too much current!''' === * Arduino output pins are only rated for 40mA, so drawing more than that will surely break it.File:Uploadingimage10.png|left|thumb..."

=== '''1.Pulling too much current!''' ===

* Arduino output pins are only rated for 40mA, so drawing more than that will surely break it.[[File:Uploadingimage10.png|left|thumb]]<br />

=== '''2.SHORTS''' ===

* A short is a zero resistance path from positive voltage to ground. These can happen when trying to connect parts and wires while the Arduino is plugged in. This can also happen when soldering, shorts are an easy and reliable way to ruin a new Arduino.

<br />

=== 3.'''Overheating''' ===

* Mostly applicable to using the motor shield. You’re notice that running motors heat up the shield. An easy way to fix this to add a resistor in series with the motors.

=== '''4.Inductive spikes''' ===

* This is a phenomenon caused by motors relying on magnetic fields to generate rotation. The magnetic fields have momentum and cannot be stopped instantaneously. When the power to the motors shut off, there will be a voltage spike sent down the wires. A “flyback diode” can be used to fix this.

[[File:Inductivespikes.png|left|thumb]]

=== '''5.Programming while Programming''' ===

* Most of the broken Arduinos have a broken programmer, meaning they can’t be reprogrammed. When programming, DON’T click program again. Wait for the programming to finish.

<br />

File:Inductivespikes.png

2020-01-23T20:50:56Z

Gouled:

inductive spikes circuit diagram

File:Uploadingimage10.png

2020-01-23T20:44:57Z

Gouled:

ddd

Main Page

2020-01-23T20:16:15Z

Gouled:

[[File:CEED-black.png|center|400x400px]]
<div style="text-align: center; font-size: 3em; margin-top: 1em;">Welcome to the CEED Wiki!</div>

==Getting Started==

===Makerspace Resources===

*[[3D Printing|3D Printing]]
*[[Embroidery]]
*[[Laser Cutting]]
*[[Soldering]]
*[[Virtual Reality]]
*[[Uploading Projects to MakerRepo]]
*

===Makerlab Resources===

*[[Design for manufacturing]]
*[[GNG tips and tricks]]
*[[How to submit a project to MakerRepo]]
*[[Purchasing Materials]]
*[[Certifying Students on MakerRepo|Certifying students in MakerRepo [STAFF]]]

Uploading Projects to MakerRepo

2020-01-23T20:15:07Z

Gouled: /* How to Create Projects in MakerRepo? */

==What is MakerRepo?==
MakerRepo is a repository of design projects free for everyone to use and share. MakerRepo acts as a source for students to access projects created by makers in the community. Projects are submitted by students on an ongoing basis. These projects form a knowledge base that is accessible by the rest of the community. The richer the contributions by the community and students, the more valuable MakerRepo will be for past, present and future students and clients.

===How to Create MakerRepo Account?===
Head-over to '''MakerRepo''' (makerepo.com) and '''Login''' or '''create''' an account at the top right corner of the page.
[[File:Image111.png|left|thumb]]

===How to Create Projects in MakerRepo?===
1)Once logged in, click on '''Create''' to create a '''new project.'''
[[File:Uploadimage2.png|left|thumb]]

2) '''Title:''' In the Title box, make sure to name your project properly so users can find it. GNGXXXX-Group-Project name (ex: GNG1103-B1-Wearable wings)[[File:Uploadimage3e.png|left|thumb]]

<br />

3) '''Description:''' In the Description box summarize your project in a few sentences, make sure to include the following

*Problem statement
*Your solution
*Cost
*Important details/ struggles that people may face while duplicating your design.

[[File:Uploadingimage4.png|left|thumb]]

4) '''Project files:''' Make sure to upload All of your project files including; designs, cad files, code, assembly instructions, market research, BOM, your lab presentation, as well as your final report. Anything that can be used to recreate your designs.

*Keep Updating files as you progress in your project

[[File:Uploadingimage5.png|left|thumb]]

5) '''Gallery:''' you should have minimum 5 pictures of your design/solution. Please try your best to take “web worthy” photos (imagine you are selling your solution, make it look presentable) and so that every part of it is shown.[[File:Uploadingimage6.png|left|thumb]]

6) '''Youtube Link:''' During the class you have recorded a 1 minute video describing your design/solution as a deliverable. Upload the video on youtube and submit the link here.

7) '''Categories:''' Choose GNG1103/1503 or GNG2101/2501 and any other that you think are relevant.

8) '''Equipment:''' Choose the equipment you have used for your project.

9) '''License:''' Here are the licenses explained in plain language:

*'''Creative Commons-Attribution:''' Gives anyone maximum freedom to do what they want with your work. But credit must be given to the original author to the best of one’s ability.
*'''Creative Commons-Attribution- Share Alike:''' This license allows anyone to do what they want with your work, but credit must be given to the original author to the best of one’s ability. Also, this license forces anyone that uses your work to '''share the work under the same license.'''
*'''Creative Commons-Attribution- No Derivative:''' Anyone can take a work released under this license and re-distribute it, but they can’t change it. Credit must be given to the original author of the work.
*'''Creative Commons-Attribution- Non-Commercial:''' This license allows anyone to do what they want with your work as long as it’s non-commercial. Credit must be given to the original author of the work.
*'''Attribution-Non-Commercial- Share Alike:''' Like the license above but it adds that anyone that uses your work under this license for non-commercial reason is forces to share their work under the same license.
*'''Attribution-Non-Commercial- No Derivative:''' The most restrictive creative commons license. This only allows people to download and share your work for no commercial gain and for no other purposes. You must give credit to the original author of the work, state their name and the title of the original work.

10) Make sure to pick '''Public''' before submitting.

11) Click '''Create Project'''.

12) Once the repository is made you must now link it to the project that you were assigned in the beginning of the semester. Go to your project and click on the dropdown in the '''Link to Project''' '''Proposal''' section in the bottom right of the page. Find your project and click '''Link'''.

13) So that every member of the team has access to the project and be able to modify pictures and descriptions, you need to add them as owners for the project. To do that all members of the team need to have a MakerRepo account. You can then select '''Choose''', find the name of your teammates and select '''Add'''. You will need to add members individually.
[[File:Image7.png|left|thumb]]

14) If a person leaves the team, you can remove their access by searching their name in the section '''Remove an owner''' and click '''Remove'''.

Uploading Projects to MakerRepo

2020-01-23T20:13:48Z

Gouled:

==What is MakerRepo?==
MakerRepo is a repository of design projects free for everyone to use and share. MakerRepo acts as a source for students to access projects created by makers in the community. Projects are submitted by students on an ongoing basis. These projects form a knowledge base that is accessible by the rest of the community. The richer the contributions by the community and students, the more valuable MakerRepo will be for past, present and future students and clients.

===How to Create MakerRepo Account?===
Head-over to '''MakerRepo''' (makerepo.com) and '''Login''' or '''create''' an account at the top right corner of the page.
[[File:Image111.png|left|thumb]]

=== How to Create Projects in MakerRepo? ===
1)Once logged in, click on '''Create''' to create a '''new project.'''
[[File:Uploadimage2.png|left|thumb]]

2) '''Title:''' In the Title box, make sure to name your project properly so users can find it. GNGXXXX-Group-Project name (ex: GNG1103-B1-Wearable wings)[[File:Uploadimage3e.png|left|thumb]]

<br />

3) '''Description:''' In the Description box summarize your project in a few sentences, make sure to include the following

*Problem statement
*Your solution
*Cost
*Important details/ struggles that people may face while duplicating your design.

[[File:Uploadingimage4.png|left|thumb]]

4) '''Project files:''' Make sure to upload All of your project files including; designs, cad files, code, assembly instructions, market research, BOM, your lab presentation, as well as your final report. Anything that can be used to recreate your designs.

*Keep Updating files as you progress in your project

[[File:Uploadingimage5.png|left|thumb]]

5) '''Gallery:''' you should have minimum 5 pictures of your design/solution. Please try your best to take “web worthy” photos (imagine you are selling your solution, make it look presentable) and so that every part of it is shown.[[File:Uploadingimage6.png|left|thumb]]

6) '''Youtube Link:''' During the class you have recorded a 1 minute video describing your design/solution as a deliverable. Upload the video on youtube and submit the link here.

7) '''Categories:''' Choose GNG1103/1503 or GNG2101/2501 and any other that you think are relevant.

8) '''Equipment:''' Choose the equipment you have used for your project.

9) '''License:''' Here are the licenses explained in plain language:

*'''Creative Commons-Attribution:''' Gives anyone maximum freedom to do what they want with your work. But credit must be given to the original author to the best of one’s ability.
*'''Creative Commons-Attribution- Share Alike:''' This license allows anyone to do what they want with your work, but credit must be given to the original author to the best of one’s ability. Also, this license forces anyone that uses your work to '''share the work under the same license.'''
*'''Creative Commons-Attribution- No Derivative:''' Anyone can take a work released under this license and re-distribute it, but they can’t change it. Credit must be given to the original author of the work.
*'''Creative Commons-Attribution- Non-Commercial:''' This license allows anyone to do what they want with your work as long as it’s non-commercial. Credit must be given to the original author of the work.
*'''Attribution-Non-Commercial- Share Alike:''' Like the license above but it adds that anyone that uses your work under this license for non-commercial reason is forces to share their work under the same license.
*'''Attribution-Non-Commercial- No Derivative:''' The most restrictive creative commons license. This only allows people to download and share your work for no commercial gain and for no other purposes. You must give credit to the original author of the work, state their name and the title of the original work.

10) Make sure to pick '''Public''' before submitting.

11) Click '''Create Project'''.

12) Once the repository is made you must now link it to the project that you were assigned in the beginning of the semester. Go to your project and click on the dropdown in the '''Link to Project''' '''Proposal''' section in the bottom right of the page. Find your project and click '''Link'''.

13) So that every member of the team has access to the project and be able to modify pictures and descriptions, you need to add them as owners for the project. To do that all members of the team need to have a MakerRepo account. You can then select '''Choose''', find the name of your teammates and select '''Add'''. You will need to add members individually.
[[File:Image7.png|left|thumb]]

14) If a person leaves the team, you can remove their access by searching their name in the section '''Remove an owner''' and click '''Remove'''.

Uploading Projects to MakerRepo

2020-01-23T20:11:47Z

Gouled:

Uploading Projects to MakerRepo

2020-01-23T20:10:48Z

Gouled:

==What is MakerRepo?==
MakerRepo is a repository of design projects free for everyone to use and share. MakerRepo acts as a source for students to access projects created by makers in the community. Projects are submitted by students on an ongoing basis. These projects form a knowledge base that is accessible by the rest of the community. The richer the contributions by the community and students, the more valuable MakerRepo will be for past, present and future students and clients.

===How to Create MakerRepo Account?===
Head-over to '''MakerRepo''' (makerepo.com) and '''Login''' or '''create''' an account at the top right corner of the page.
[[File:Image111.png|left|thumb]]

==== How to Create Projects in MakerRepo? ====
1)Once logged in, click on '''Create''' to create a '''new project.'''
[[File:Uploadimage2.png|left|thumb]]

2) '''Title:''' In the Title box, make sure to name your project properly so users can find it. GNGXXXX-Group-Project name (ex: GNG1103-B1-Wearable wings)[[File:Uploadimage3e.png|left|thumb]]

<br />

3) '''Description:''' In the Description box summarize your project in a few sentences, make sure to include the following

*Problem statement
*Your solution
*Cost
*Important details/ struggles that people may face while duplicating your design.

[[File:Uploadingimage4.png|left|thumb]]

4) '''Project files:''' Make sure to upload All of your project files including; designs, cad files, code, assembly instructions, market research, BOM, your lab presentation, as well as your final report. Anything that can be used to recreate your designs.

*Keep Updating files as you progress in your project

[[File:Uploadingimage5.png|left|thumb]]

5) '''Gallery:''' you should have minimum 5 pictures of your design/solution. Please try your best to take “web worthy” photos (imagine you are selling your solution, make it look presentable) and so that every part of it is shown.[[File:Uploadingimage6.png|left|thumb]]

6) '''Youtube Link:''' During the class you have recorded a 1 minute video describing your design/solution as a deliverable. Upload the video on youtube and submit the link here.

7) '''Categories:''' Choose GNG1103/1503 or GNG2101/2501 and any other that you think are relevant.

8) '''Equipment:''' Choose the equipment you have used for your project.

9) '''License:''' Here are the licenses explained in plain language:

*'''Creative Commons-Attribution:''' Gives anyone maximum freedom to do what they want with your work. But credit must be given to the original author to the best of one’s ability.
*'''Creative Commons-Attribution- Share Alike:''' This license allows anyone to do what they want with your work, but credit must be given to the original author to the best of one’s ability. Also, this license forces anyone that uses your work to '''share the work under the same license.'''
*'''Creative Commons-Attribution- No Derivative:''' Anyone can take a work released under this license and re-distribute it, but they can’t change it. Credit must be given to the original author of the work.
*'''Creative Commons-Attribution- Non-Commercial:''' This license allows anyone to do what they want with your work as long as it’s non-commercial. Credit must be given to the original author of the work.
*'''Attribution-Non-Commercial- Share Alike:''' Like the license above but it adds that anyone that uses your work under this license for non-commercial reason is forces to share their work under the same license.
*'''Attribution-Non-Commercial- No Derivative:''' The most restrictive creative commons license. This only allows people to download and share your work for no commercial gain and for no other purposes. You must give credit to the original author of the work, state their name and the title of the original work.

10) Make sure to pick '''Public''' before submitting.

11) Click '''Create Project'''.

12) Once the repository is made you must now link it to the project that you were assigned in the beginning of the semester. Go to your project and click on the dropdown in the '''Link to Project''' '''Proposal''' section in the bottom right of the page. Find your project and click '''Link'''.

13) So that every member of the team has access to the project and be able to modify pictures and descriptions, you need to add them as owners for the project. To do that all members of the team need to have a MakerRepo account. You can then select '''Choose''', find the name of your teammates and select '''Add'''. You will need to add members individually.
[[File:Image7.png|left|thumb]]

14) If a person leaves the team, you can remove their access by searching their name in the section '''Remove an owner''' and click '''Remove'''.

Uploading Projects to MakerRepo

2020-01-23T20:08:32Z

Gouled:

==What is MakerRepo?==
MakerRepo is a repository of design projects free for everyone to use and share. MakerRepo acts as a source for students to access projects created by makers in the community. Projects are submitted by students on an ongoing basis. These projects form a knowledge base that is accessible by the rest of the community. The richer the contributions by the community and students, the more valuable MakerRepo will be for past, present and future students and clients.

===How to Create MakerRepo Account?===
Head-over to '''MakerRepo''' (makerepo.com) and '''Login''' or '''create''' an account at the top right corner of the page.
[[File:Image111.png|left|thumb]]

=== How to Create Projects in MakerRepo? ===
1)Once logged in, click on '''Create''' to create a '''new project.'''
[[File:Uploadimage2.png|left|thumb]]

2) '''Title:''' In the Title box, make sure to name your project properly so users can find it. GNGXXXX-Group-Project name (ex: GNG1103-B1-Wearable wings)
[[File:Uploadimage3e.png|left|thumb]]

<br />

3) '''Description:''' In the Description box summarize your project in a few sentences, make sure to include the following

* Problem statement
* Your solution
* Cost
* Important details/ struggles that people may face while duplicating your design.

[[File:Uploadingimage4.png|left|thumb]]

4) '''Project files:''' Make sure to upload All of your project files including; designs, cad files, code, assembly instructions, market research, BOM, your lab presentation, as well as your final report. Anything that can be used to recreate your designs.

* Keep Updating files as you progress in your project

[[File:Uploadingimage5.png|left|thumb]]

5) '''Gallery:''' you should have minimum 5 pictures of your design/solution. Please try your best to take “web worthy” photos (imagine you are selling your solution, make it look presentable) and so that every part of it is shown.
[[File:Uploadingimage6.png|left|thumb]]

6) '''Youtube Link:''' During the class you have recorded a 1 minute video describing your design/solution as a deliverable. Upload the video on youtube and submit the link here.

7) '''Categories:''' Choose GNG1103/1503 or GNG2101/2501 and any other that you think are relevant.

8) '''Equipment:''' Choose the equipment you have used for your project.

9) '''License:''' Here are the licenses explained in plain language:

* '''Creative Commons-Attribution:''' Gives anyone maximum freedom to do what they want with your work. But credit must be given to the original author to the best of one’s ability.
* '''Creative Commons-Attribution- Share Alike:''' This license allows anyone to do what they want with your work, but credit must be given to the original author to the best of one’s ability. Also, this license forces anyone that uses your work to '''share the work under the same license.'''
* '''Creative Commons-Attribution- No Derivative:''' Anyone can take a work released under this license and re-distribute it, but they can’t change it. Credit must be given to the original author of the work.
* '''Creative Commons-Attribution- Non-Commercial:''' This license allows anyone to do what they want with your work as long as it’s non-commercial. Credit must be given to the original author of the work.
* '''Attribution-Non-Commercial- Share Alike:''' Like the license above but it adds that anyone that uses your work under this license for non-commercial reason is forces to share their work under the same license.
* '''Attribution-Non-Commercial- No Derivative:''' The most restrictive creative commons license. This only allows people to download and share your work for no commercial gain and for no other purposes. You must give credit to the original author of the work, state their name and the title of the original work.

10) Make sure to pick '''Public''' before submitting.

11) Click '''Create Project'''.

12) Once the repository is made you must now link it to the project that you were assigned in the beginning of the semester. Go to your project and click on the dropdown in the '''Link to Project''' '''Proposal''' section in the bottom right of the page. Find your project and click '''Link'''.

13) So that every member of the team has access to the project and be able to modify pictures and descriptions, you need to add them as owners for the project. To do that all members of the team need to have a MakerRepo account. You can then select '''Choose''', find the name of your teammates and select '''Add'''. You will need to add members individually.
[[File:Image7.png|left|thumb]]

14) If a person leaves the team, you can remove their access by searching their name in the section '''Remove an owner''' and click '''Remove'''.

File:Image7.png

2020-01-23T20:06:12Z

Gouled:

haha

File:Uploadingimage6.png

2020-01-23T19:48:23Z

Gouled:

ddddd

File:Uploadingimage5.png

2020-01-23T19:45:11Z

Gouled:

ddc

File:Uploadingimage4.png

2020-01-23T19:36:43Z

Gouled:

File:Uploadimage3e.png

2020-01-23T19:10:01Z

Gouled:

File:Uploadimage2.png

2020-01-23T19:07:00Z

Gouled:

Uploading Projects to MakerRepo

2020-01-23T18:36:59Z

Gouled: Created page with "== What is MakerRepo? == MakerRepo is a repository of design projects free for everyone to use and share. MakerRepo acts as a source for students to access projects created b..."

File:Image111.png

2020-01-23T18:29:41Z

Gouled:

gidbgdobdg